Just 4 days away! Also, check out Fynn the Hunter’s 360!

Just 4 days away from launch...it seems surreal! There's been so much hard work and dedication that's gone into the designs and production of the Wander line. On top of developing the eventual boardgame, we even have people helping to write the fluff and backstory to the world! Its amazing to see what kind of fantastic work that's being produced for us and hearing from our fans. We really believe that we are bringing something unique to the industry, and so far most people agree which couldn't make us happier. With the upcoming kickstarter, we could make it all a reality and start off this line on a grand scale! You guys can help us do that. Make sure to help share not just this websites posts, but our posts on Facebook, Instagram and Twitter! The more people know about the campaign better the chances that we'll be able to fund and get moving into some great new designs we've...
Read More

Just 5 Days to go!

There's just 5 days until the launch of the kickstarter! Its so close! We are incredibly prepared and excited at this point to make this miniature line a reality, and we'll be able to do it with your help. Fans have already done an amazing job of sharing posts and spreading the word, so lets keep it up! Since the theme so far this week has been 360's of the models, we wanted to share yet another video! This time its featuring Tank, one of our favorite designs from the base set. There's been some questions about the design about whether or not he is missing an arm, and we'd like to confirm that YES, he is missing an arm! He lost during a huge battle from his young days as a soldier in the imperial army, but he doesn't let that stop him from living a full life as a Wanderer. Check out the model, let us know what you...
Read More

Just 6 more days! Plus, a new 360 video!

With just 6 days away from our Kickstarter official launch on June 20th, we wanted to share another 360 video! This one is of Kira, our agile squirrel thief. Its amazing to see these characters in 3D, even more so to actually hold a 3D print in your hand! Speaking of, we should have some more 3D prints this afternoon or early tomorrow! Also, our lead artist and founder Heath "BA" Foley will be hosting a Hobby Hangout later this evening at 7:30 pm, we'll make sure to post the link on our Facebook page when it goes live! And without further delay...here's Kira!  ...
Read More

Just a week from our Kickstarter! Plus, a 360 of Roland!

We are officially just a week away from the kickstarter launch! Its going to be an exciting week leading up to the launch for sure, because we'll be sharing more art, some 360 video's of the character models, and a sneak preview of the first stretch goal! We will ALSO have some 3D prints of Kira, Ibexus and Tank by this Wednesday. There's so much to show and share, we cant wait! We want to make sure to get the word out to as many people as we can about this campaign, so if you guys could share this with as many people as you are willing, we would be in your debt! As a new small company advertising is beyond our reach at the moment, so we are depending on everyone to share this campaign. The more people we can get to back the campaign, the more awesome miniatures we can produce! :D Of course, we need something to actually share! Here is...
Read More
The Design Process

The Design Process

Hey everyone! With the Kickstarter looming just 14 days away, we wanted to share the design process for one of the characters of Wander! We will eventually be doing a google hangout before the campaign launches to show the process as its happening for a character that will eventually appear as a a stretch goal, but for now we'd like to show you how we came up with the design for Roland! We are going to hand it over to our talented artist, Heath "BA" Foley! He'll take you through the process of designing Roland from beginning to end!   Hey guys, I'm really happy to share how the design process works with everyone! I've worked both digital and traditional mediums over my art career, but for Wander I'm sticking with digital so most of the work you are about to see was created with a Wacom Intuos Monitor and Photoshop CC. I've been designing characters for years, so this is my process for how I...
Read More

Time to start the Kickstarter Countdown!!!

Hello everyone! We are just 19 days away from the Kickstarter officially launching on the 20th. We couldn't be more excited about this, but we need all the help we can get about spreading the word far and wide! As a small company, we are really going to depend on our fans sharing any posts or news we put up with their friends, its a huge help! We can only reach so many people, and we'd like to reach so much more to let them know about our campaign and the mini's we are planning on producing. If it helps anyone out there who's on the fence about our campaign, we've put together a handy Kickstarter Info page on the site to help inform any potential backer out there :D Its got a lot of info on the base goal, some stretch goals, add ons, and much more. We figured if it helps people make a decision about the campaign, it...
Read More

Kickstarter Launches June 20th!

We are ecstatic to announce that June 20th is our official launch date for the Kickstarter! We've got everything set up and ready to go, and we couldn't be happier. There's lot to do, but we've got the base goal lined up and if we can clear it, there's plenty of stretch goals lined up as well! We are going to share some info here, and create an official Kickstarter page on the website to help supply any info that our potential backers need :D Currently the base goal will unlock 5 characters that you can see on the graphic above! They're all already sculpted, but putting them into production is always an intense and expensive process which is why we decided to go with a Kickstarter campaign. It will allow us to get these miniatures off the ground and into everyones hands MUCH faster than we would have been able to on our own. Plus it will open up the possibility of introducing...
Read More

A Grumpy Wizard, Some Environment art, and a Kickstarter Update!

Hey everyone! We've been working hard on prepping everything for the Kickstarter campaign, slated for later in June. At this point, we've got everything lined up! Were just putting on the last few graphics and finishing up some illustrations so that we can launch with all the assets we'll need. We even have an amazing video being created to help hype up the line! From what we've seen, you guys will love it. Its all coming together beautifully, so we wanted to share the last design that's part of the base goal...say hello to Ibexus, an incredibly grumpy ibex wizard! This guy was really fun to design, and the sculpt of him turned out great! We cant wait to share that one with you guys, but it'll have to wait until were closer to launch :D Another piece of art we wanted to share was this new environment shot. These mini designs come from a lush, vibrant world and we wanted to share...
Read More

Check out the new Website!

Hey everyone! We hope everyone is having a great Friday! During the week, Heath decided that the website needed a bit of an overhaul, so we decided to redesign the site and update it with a few new pages and pictures in the gallery...tell us what you think! Also, we've got most of the kinks worked out on the Kickstarter (like how to handle pledges after the campaign, what kind of stretch goals we want to do, and shipping!) Its definitely an undertaking. One of the biggest questions was how we are going to handle managing pledges after the campaign, and we've decided to do that through our web-store! It will only be available to Kickstarter backers and potentially late backers after the campaign. The only reason the store would be open before all the backers get their mini's is if we have a new miniature we're producing that wasn't part of the campaign. Also, were going to be handling shipping after...
Read More

A new design appears! Plus a cool sculpt!

Hey everyone! We've been hard at work prepping for the Kickstarter, and we've got 99% of the complications of a first Kickstarter figured out :D It really is an intense process, but it's sooo worth it. We've finally got shipping and pledge management all sorted! We'll share more about the basics of the campaign as we get closer to the launch date, but until then we wanted to share another design...say hello to Jack, our Hunter! Also, we wanted to show you guys a preview of Roland's sculpt...you've seen the painted version, we figured you'd like to see the 3D version as well! Let us know what you think! As we get closer to the campaign, we'll share more art and sculpts, and preview the first few stretch goals as well. Until then, let us know what you think of these designs! ...
Read More